BROADYA Blog
Technical Articles & Guides
PE vs EVA Foam Tape for Appliance Panels: What Changes the Choice?
Compare PE and EVA foam tape for appliance panels. Why Broadya’s catalog points to PE first, where EVA may fit, and what engineers must qualify.
Read article →
Clear Foam Tape for Transparent Glass-to-Plastic Bonding
Choose clear foam tape for visible glass-to-plastic joints by evaluating bondline appearance, substrates, geometry and service conditions.
Read article →
How to Qualify an Alternative to 3M 9448A Tissue Tape
Qualify a 3M 9448A tissue tape alternative by carrier, adhesive system, liner, substrates and converting performance before approval.
Read article →
3M VHB 5952 vs 4910: Choose by Bondline and Substrate
Compare the documented color, adhesive construction and thickness of 3M VHB 5952 and 4910, then screen both against the actual joint.
Read article →
Ultra-Thin Waterproof PE Foam Tape for Electronics: Define the Joint Before the Tape
A practical way to define seal path, gap tolerance and device ingress validation before choosing thin PE foam tape.
Read article →
PE Foam Tape for Wheel Balance Weights: Specify the Interface Before the Tape
A practical specification path for bonding balance weights to coated rims: geometry, coating, preparation, installation, and assembly validation.
Read article →
PE Foam Tape for Wood Furniture Bonding: Qualifying the Joint
Screen a 1.0 mm PE foam tape furniture joint by its actual wood finish, moisture exposure, bond area and load direction.
Read article →Flame Retardant Double Sided Tape: How to Verify a UL94 Claim
Which UL 94 protocol actually applies to a thin tape, why an FMVSS 302 pass is a different result, what the flame rating leaves uncovered inside a battery pack, and the four documents to demand before you shortlist a supplier.
Read article →
Battery-Pack Flame-Retardant Tape: How to Check the Evidence
A practical guide to checking whether a flame-retardant tape report matches the product construction and battery-pack acceptance requirement.
Read article →
Kiss-Cut vs Through-Cut Tape Parts: Design for Pickup and Placement
Set the cut path from how a part must be supplied, picked and placed.
Read article →
Wheel-Arch Trim Tape Bonding: Start With the Joint, Not a Foam Name
Assess wheel-arch tape attachment from the actual substrates, gap and load path.
Read article →
PET vs OPP vs PVC Film Carrier: Choose for the Converted Part
Choose a film carrier from the part’s processing and service needs, then verify the finished construction.
Read article →Direct Contact
Prefer phone or WhatsApp? Reach our sales team directly.
- ✉Email
- 📞
- 📱WhatsApp
- 🏛AddressGuangzhou, Guangdong, China